SKF Speedi Sleeve 99700 Wear Sleeves
SKF Adapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on plain or stepped shafts. They are easy to install and require no additional location on the shaft. When adapter sleeves are used on plain shafts, the bearing can be located at any position on the shaft. When used on stepped shafts together with an L-shaped spacer ring, bearings can be accurately positioned axially thereby facilitating bearing mounting and dismounting.SKF adapter sleeves are supplied complete with lock nut and locking device. Smaller sizes use a lock nut with a locking washer, larger sizes use a nut with locking clip.
Benefits: Re-useable, adjustable, positive location, easy to dismount.
SKF Adapter sleeve Prefixes :
H Sleeve for shafts in metric dimensions
HA Sleeve for shafts of 1/16" increments
HE Sleeve for shafts of 1/4" increments
HS Sleeve for shafts of 1/8" increments
OH Oil hole in large end of sleeve to inject oil between the sleeve and the bearing generally for metric shafts sizes if inch an
example would be OHA-----.
OH..B OSKF Adapter sleevesil injected between bearing, sleeve and shaft. Sizes 32-40; one oil-supply duct from large end of sleeve. Size > 44, two oil supply ducts from large end of sleeve.
OH..H Oil injected between bearing and sleeve, one oil supply duct from nut side of sleeve.
OH..HB Oil injected between bearing, sleeve and shaft. Sizes 32-40: One oil-supply duct from nut side of sleeve. Size > 44 up; Two oil supply ducts from nut side of sleeve.
SKF Adapter sleeve Suffixes:
B Whitworth threads
C Sleeves with ribbed washer to be used with sealed bearings**
E The standard lock nut and washer is replaced by a KMFE, washerless nut or the standard lock nut HM30 is replaced by an HME nut with a recessed outside diameter.
HE HME locknut used
L Sleeves with low section height nuts and washers (KML & MBL vs. KM & MB)
TL The standard HM..T nut and MB washer, have been replaced by HM30 and MS 30 nut and washer. These have a lower section height.
U Sleeve only (no nut/washer)
Some Part Number of Bearing Adapter Sleeve:
| New model |
Old model |
dimension(dxd1xB1xd2xB2xB3) |
Weight(kg) |
| H204 |
H204X |
20×17×24×32×7 |
0.036 |
| H205 |
H205X |
25×20×26×38×8 |
0.064 |
| H206 |
H206X |
30×25×27×45×8 |
0.086 |
| H207 |
H207X |
35×30×29×52×9 |
0.12 |
| H208 |
H208X |
40×35×31×58×10 |
0.16 |
| H209 |
H209X |
45×40×32×65×11 |
0.21 |
| H210 |
H210X |
50×45×35×70×12 |
0.24 |
| H211 |
H211X |
55×50×37×75×12 |
0.28 |
| H212 |
H212X |
60×55×38×80×13 |
0.31 |
| H213 |
H213X |
65×60×40×85×14 |
0.36 |
| H215 |
H215X |
75×65×43×98×15 |
0.66 |
| H216 |
H216X |
80×70×46×105×17 |
0.81 |
| H217 |
H217X |
85×75×50×110×18 |
0.94 |
| H218 |
H218X |
90×80×52×120×18 |
1.1 |
| H219 |
H219X |
95×85×55×125×19 |
1.25 |
| H220 |
H220X |
100×90×58×130×20 |
1.4 |
| H222 |
H222X |
110×100×63×145×21 |
1.8 |
| Adapter Sleeve |
Withdrawal Sleeve |
| H200 Series |
H204-H222 |
AH200 Series |
AH208-AH256 |
| H300 Series |
H304-H322 |
AH300 Series |
AH308-AH334 |
| H3000 Series |
H3024-H3096 |
AH2300 Series |
AH2308-2356 |
| H3100 Series |
H3120-H3196 |
AH3000 Series |
AH3024-AH3096 |
| H2300 Series |
H2304-H2356 |
AH3100 Series |
AH3120-AH3196 |
| H3200 Series |
H3260-H3296 |
AH3200 Series |
AH3218-AH3296
|
Photo of Bearing Adapter Sleeves H307:
About US
There are 500 workers in our factory, as the industry demands developed every year, last year we did invest 6 million USD to build expand our factory. As our Europe clients become more and more, most of our equipment and machine are import from Germany, and we did use the Germany Engineer to operate our team. So that we have the world leading technology to produce bearings.
Our main products are ball bearings and roller bearings, we can produce them from small size to big size such as deep groove ball bearing, angular contact ball bearings, spherical roller bearing, cylindrical roller bearing, taper roller bearing, needle bearing. Also we can produce the slide bearings such as pillow block, spherical plain bearing and bearing bush, linear bearing. We have a department special to develop the auto bearings such as wheel hub bearings and clutch bearings, as now the auto bearings have a big market in the worldwide.
Our clients are all over the world such as: Asia, Europe, south American, north American. Also Africa and Australia. Different area have different demands and market, as we have 10 years export experience, we are very familiar with the market in different area.
Also in recently, OEM service become very popular, we did help a lot of customer to do the OEM service. We have a workshop only produce the bearing box, we can produce the box if the customer send us their requirement. So if you want we OEM your brand bearings, we also can help you to design your brand box.
" Quality to win customer, and good after- sell service to win the regular customer" is our faith. So welcome to send us the inquiry, hope we can be your best bearings partner in China.
Welcome to send us the inquiry !
Our Workshop:
Contact US:
){kind=link}
){kind=link}