Bearing Sleeves, Adapter Sleeves H307, Adapter Sleeves manufacturer / supplier in China, offering Adapter Sleeves H307 for Spherical Roller Bearing 22207ek, SKF Spherical Roller Bearing 22218 Ek, Kaydon Thin Section Ball Bearing Kg220cpo and so on.
|Min. Order / Reference FOB Price||1 Piece||US $1/ Piece|
|Production Capacity:||20000 PCS/Month|
|Payment Terms:||L/C, T/T, D/P, Western Union|
Adapter Sleeves H307 for Spherical Roller Bearing 22207EK
SKF Adapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on plain or stepped shafts. They are easy to install and require no additional location on the shaft. When adapter sleeves are used on plain shafts, the bearing can be located at any position on the shaft. When used on stepped shafts together with an L-shaped spacer ring, bearings can be accurately positioned axially thereby facilitating bearing mounting and dismounting.SKF adapter sleeves are supplied complete with lock nut and locking device. Smaller sizes use a lock nut with a locking washer, larger sizes use a nut with locking clip.
Benefits: Re-useable, adjustable, positive location, easy to dismount.
SKF Adapter sleeve Prefixes :
H Sleeve for shafts in metric dimensions
HA Sleeve for shafts of 1/16" increments
HE Sleeve for shafts of 1/4" increments
HS Sleeve for shafts of 1/8" increments
OH Oil hole in large end of sleeve to inject oil between the sleeve and the bearing generally for metric shafts sizes if inch an
example would be OHA-----.
OH..B OSKF Adapter sleevesil injected between bearing, sleeve and shaft. Sizes 32-40; one oil-supply duct from large end of sleeve. Size > 44, two oil supply ducts from large end of sleeve.
OH..H Oil injected between bearing and sleeve, one oil supply duct from nut side of sleeve.
OH..HB Oil injected between bearing, sleeve and shaft. Sizes 32-40: One oil-supply duct from nut side of sleeve. Size > 44 up; Two oil supply ducts from nut side of sleeve.
SKF Adapter sleeve Suffixes:
B Whitworth threads
C Sleeves with ribbed washer to be used with sealed bearings**
E The standard lock nut and washer is replaced by a KMFE, washerless nut or the standard lock nut HM30 is replaced by an HME nut with a recessed outside diameter.
HE HME locknut used
L Sleeves with low section height nuts and washers (KML & MBL vs. KM & MB)
TL The standard HM..T nut and MB washer, have been replaced by HM30 and MS 30 nut and washer. These have a lower section height.
U Sleeve only (no nut/washer)
Some Part Number of Bearing Adapter Sleeve: